Plumbers Putty 750g
EVERBUILD PLUMBERS PUTTY is a ready mixed, waterproof; non-setting putty designed for sealing and bedding w/c soil pipes, joints in sanitary wear, sinks and waste water fittings. PLUMBERS’ PUTTY will seal ceramics, vitreous enamels, metals and PVC. PLUMBERS PUTTY remains permanently flexible to allow for joint movement, is overpaintable, and is compatible with EVERFLEX Silicone sealants.
Easy to apply by hand
Non setting - remains permanently elastic
Added plasticizer improves adhesion and helps prevent cracking.
Areas for Use
Sealing and bedding w/c soil pipes, joints in sanitary wear, sinks and waste water fittings
Seals ceramics, vitreous enamels, metals and PVC.
When bedding sink/vanity units etc, always finish with a final seal of EVERFLEX SILICONE 500.
As the manufacturer cannot know all the uses its products may be put to, it is the users responsibility to determine suitability of use. If in doubt, contact Technical Services Department for advice.
Do not apply below 5oC.
Sealing applications (e.g. W/C soil pipes to pans) – Centralize spigot with untarred hemp. Pack void with PLUMBERS PUTTY and finish with putty knife.
Bedding applications – Place PLUMBERS PUTTY into seating recess and offer up the second component. Trim as required.
In all cases, clean up surfaces by rubbing with a separate piece of PLUMBERS PUTTY. Remove from hands with soap and water.
Appearance Thick buff paste
Specific Gravity @ 20°C 2.0 gcm3 (approx)
Movement Acco Medium
Application Temp 5oC to 30oC
Service Temp -30 to 50oC
Health & Safety
Consult MSDS for full list of hazards.
Store between 5 and 25°C in original unopened containers
24 months from date of manufacture when stored according to manufacturer’s instructions.